PEI-Mediated Assembly of Fe3O4 onto SiO2-Encapsulated CsPbBr3 for Highly Sensitive Fluorescent Lateral Flow Immunoassay.

The conventional lateral flow immunoassay (LFIA) method using colloidal gold nanoparticles (Au NPs) as labeling agents faces two inherent limitations, including restricted sensitivity and poor quantitative capability, which impede early viral infection detection. Herein, we designed and synthesized CsPbBr3 perovskite quantum dot-based composite nanoparticles, CsPbBr3@SiO2@Fe3O4 (CSF), which integrated fluorescence detection and magnetic enrichment properties into LFIA technology and achieved rapid, sensitive, and convenient quantitative detection of the SARS-CoV-2 virus N protein. In this study, CsPbBr3 served as a high-quantum-yield fluorescent signaling probe, while SiO2 significantly enhanced the stability and biomodifiability of CsPbBr3. Importantly, the SiO2 shell shows relatively low absorption or scattering toward fluorescence, maintaining a quantum yield of up to 74.4% in CsPbBr3@SiO2. Assembly of Fe3O4 nanoparticles mediated by PEI further enhanced the method's sensitivity and reduced matrix interference through magnetic enrichment. Consequently, the method achieved a fluorescent detection range of 1 × 102 to 5 × 106 pg·mL-1 after magnetic enrichment, with a limit of detection (LOD) of 58.8 pg·mL-1, representing a 13.3-fold improvement compared to nonenriched samples (7.58 × 102 pg·mL-1) and a 2-orders-of-magnitude improvement over commercial colloidal gold kits. Furthermore, the method exhibited 80% positive and 100% negative detection rates in clinical samples. This approach holds promise for on-site diagnosis, home-based quantitative tests, and disease procession evaluation.

In Situ Growth of Conductive Metal-Organic Framework onto Cu2O for Highly Selective and Humidity-Independent Hydrogen Sulfide Detection in Food Quality Assessment.

The sensitivity of chemiresistive gas sensors based on metal oxide semiconductors (MOSs) has been inherently affected by ambient humidity because their reactive oxygen species are easily hydroxylated by water molecules, which significantly reduces the accuracy of the gas sensors in food quality assessment. Although conventional metal organic frameworks (MOFs) can serve as coatings for MOSs for humidity-independent gas detection, they have to operate at high working temperatures due to their low or nonconductivity, resulting in high power consumption, significant manufacturing inconvenience, and short-term stability due to the oxidation of MOFs. Here, the conductive and thickness-controlled CuHHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene)-coated Cu2O are developed by combining in situ etching and layer-by-layer liquid-phase growth method, which achieves humidity-independent detection of H2S at room temperature. The response to H2S only decreases by 2.6% below 75% relative humidity (RH), showing a 9.6-fold improvement than the bare Cu2O sensor, which is ascribed to the fact that the CuHHTP layer hinders the adsorption of water molecules. Finally, a portable alarm system is developed to monitor food quality by tracking released H2S. Compared with gas chromatography method, their relative error is within 9.4%, indicating a great potential for food quality assessment.

Multifunctional Nanoprobe-Amplified Enzyme-Linked Immunosorbent Assay on Capillary: A Universal Platform for Simple, Rapid, and Ultrasensitive Dual-Mode Pathogen Detection.

Although the traditional enzyme-linked immunosorbent assay (ELISA) has been widely applied in pathogen detection and clinical diagnostics, it always suffers from complex procedures, a long incubation time, unsatisfying sensitivity, and a single signal readout. Here, we developed a simple, rapid, and ultrasensitive platform for dual-mode pathogen detection based on a multifunctional nanoprobe integrated with a capillary ELISA (CLISA) platform. The novel capture antibodies-modified capillaries can act as a swab to combine in situ trace sampling and detection procedures, eliminating the dissociation between sampling and detection in traditional ELISA assays. With excellent photothermal and peroxidase-like activity, the Fe3O4@MoS2 nanoprobe with a unique p-n heterojunction was chosen as an enzyme substitute and amplified signal tag to label the detection antibody for further sandwich immune sensing. As the analyte concentration increased, the Fe3O4@MoS2 probe could generate dual-mode signals, including remarkable color changes from the chromogenic substrate oxidation as well as photothermal enhancement. Moreover, to avoid false negative results, the excellent magnetic capability of the Fe3O4@MoS2 probe can be used to pre-enrich the trace analytes, amplifying the detection signal and enhancing the immunoassay's sensitivity. Under optimal conditions, specific and rapid detection of SARS-CoV-2 has been realized successfully based on this integrated nanoprobe-enhanced CLISA platform. The detection limits were 5.41 pg·mL-1 for the photothermal assay and 150 pg·mL-1 for the visual colorimetric assay. More importantly, the simple, affordable, and portable platform can also be expanded to rapidly detect other targets such as Staphylococcus aureus and Salmonella typhimurium in practical samples, making it a universal and attractive tool for multiple pathogen analysis and clinical testing in the post COVID-19 era.

Quantitative Time-Resolved Visualization of Catalytic Degradation Reactions of Environmental Pollutants by Integrating Single-Drop Microextraction and Fluorescence Sensing.

Current methods for evaluating catalytic degradation reactions of environmental pollutants primarily rely on chromatography that often suffers from intermittent analysis, a long turnaround period, and complex sample pretreatment. Herein, we propose a quantitative time-resolved visualization method to evaluate the progress of catalytic degradation reactions by integrating sample pretreatment [single-drop microextraction, (SDME)], fluorescence sensing, and a smartphone detection platform. The dechlorination reaction of chlorobenzene derivatives was first investigated to validate the feasibility of this approach, in which SDME plays a critical role in direct sample pretreatment, and inorganic CsPbBr3 perovskite encapsulated in a metal-organic framework (MOF-5) was utilized as the fluorescent chromogenic agent (FLCA) in SDME to realize fast in situ colorimetric detection via the color switching from green (CsPbBr3) to blue (chlorine lead bromide, inorganic CsPbCl3 perovskite). The smartphone, which can calculate the B/G value of FLCA, serves as a data output window for quantitative time-resolved visualization. Further, a [Eu(PMA)]n (PMA= pyromellitic acid) fluorescent probe was constructed to use as an FLCA for the in situ evaluation of cinnamaldehyde and p-nitrophenol catalytic reduction. This approach not only minimizes the utilization of organic solvents and achieves quantitively efficient time-resolved visualization but also provides a feasible method for in situ monitoring of the progress of catalytic degradation reactions.

Ag Nanoparticles with Ultrathin Au Shell-Based Lateral Flow Immunoassay for Colorimetric and SERS Dual-Mode Detection of SARS-CoV-2 IgG.

Immunoglobulin detection is essential for diagnosing progression of SARS-CoV-2 infection, for which SARS-CoV-2 IgG is one of the most important indexes. In this paper, Ag nanoparticles with ultrathin Au shells (∼2 nm) embedded with 4-mercaptobenzoic acid (MBA) (AgMBA@Au) were manufactured via a ligand-assisted epitaxial growth method and integrated into lateral flow immunoassay (LFIA) for colorimetric and SERS dual-mode detection of SARS-CoV-2 IgG. AgMBA@Au possessed not only the surface chemistry advantages of Au but also the superior optical characteristics of Ag. Moreover, the nanogap between the Ag core and the Au shell also greatly enhanced the Raman signal. After being modified with anti-human antibodies, AgMBA@Au recognized and combined with SARS-CoV-2 IgG, which was captured by the SARS-CoV-2 spike protein on the T line. Qualitative analysis was achieved by visually observing the color of the T line, and quantitative analysis was conducted by measuring the SERS signal with a sensitivity four orders of magnitude higher (detection limit: 0.22 pg/mL). The intra-assay and inter-assay variation coefficients were 7.7 and 10.3%, respectively, and other proteins at concentrations of 10 to 20 times higher than those of SARS-CoV-2 IgG could hardly produce distinguishable signals, confirming good reproducibility and specificity. Finally, this method was used to detect 107 clinical serum samples. The results agreed well with those obtained from enzyme-linked immunosorbent assay kits and were significantly better than those of the colloidal gold test strips. Therefore, this dual-mode LFIA has great potential in clinical practical applications and can be used to screen and trace the early immune response of SARS-CoV-2.

Cu2O induced Au nanochains for highly sensitive dual-mode detection of hydrogen sulfide.

Colorimetric and chemoresistive gas sensing methods have aroused great interest in H2S monitoring due to their unique merits of naked-eye readout, and highly sensitive and rapid detection. However, combining these two methods for gas detection, especially utilizing one material as their common sensing material is a grand challenge because they are inconsistent in sensing mechanism. Taking advantage of the strong chemical affinity of Cu2O for H2S and the excellent performance of localized surface plasmon resonance (LSPR) of Au nanoparticles (NPs) in the visible regions and its ability as a noble metal to enhance gas sensing property, the Cu2O-Au nanochains (NCs) were prepared for dual-mode detection of H2S gas. The Cu2O-Au chemoresistive gas sensor shows a 5-fold higher response than Cu2O sensor at room temperature with a low detection limit of 10 ppb. Such good performance is attributed to the spillover effect and catalytic activity of Au NPs, and the enhanced H2S adsorption after Au loading as revealed by density functional theory calculation. Test strips containing Cu2O-Au produced for gaseous H2S detection show superior color gradient changes (blue, yellow, and brown). Finally, the practicability of the method was validated by real-time monitoring H2S released from cell culture.

Single-Atom-like B-N3 Sites in Ordered Macroporous Carbon for Efficient Oxygen Reduction Reaction.

On the premise of cleanliness and stability, improving the catalytic efficiency for the oxygen reduction reaction in the electrode reaction of fuel cells and metal-air batteries is of vital importance. Studies have shown that heteroatom doping and structural optimization are efficient strategies. Herein, a single-atom-like B-N3 configuration in carbon is designed for efficient oxygen reduction reaction catalysis inspired by the extensively studied transition metal M-Nx sites, which is supported on the ordered macroporous carbon prepared by utilizing a hydrogen-bonded organic framework as carbon and nitrogen sources and SiO2 spheres as a template. The co-doping of B/N and ordered macroporous structures promote the metal-free material high oxygen reduction catalytic performance in alkaline media. DFT calculations reveal that the B-N3 structure played a key role in enhancing the oxygen reduction activity by providing rich favorable *OOH and *OH adsorption sites on the B center. The promoted formation of *OH/*OOH intermediates accelerated the electrocatalyst reaction. This study provides new insights into the design of single-atom-like nonmetallic ORR electrocatalysts and synthesis of ordered macroporous carbons based on hydrogen-bonded organic frameworks.

Single-crystal-to-single-crystal transformation and proton conductivity of three hydrogen-bonded organic frameworks.

We report the cyclic single-crystal-to-single-crystal transformation of three hydrogen-bonded organic frameworks (HOFs), induced by the change of temperature and humidity, which clearly reveals that the -SO3-and -NH2 groups in UPC-H7 and UPC-H8 facilitate the diffusion of water molecules into their anhydrous structures to form hydrous UPC-H9. Their proton conductivity was studied under different humidity at varying temperature, showing that the proton conductivity is closely related to water molecules entering the crystal structures arising from the hydrogen bonded reorganization in combination with the triaxial single-crystal proton conductivity tests.

Fabrication of a Hydrogen-Bonded Organic Framework Membrane through Solution Processing for Pressure-Regulated Gas Separation.

Ordered and flexible porous frameworks with solution processability are highly desirable to fabricate continuous and large-scale membranes for the efficient gas separation. Herein, the first microporous hydrogen-bonded organic framework (HOF) membrane has been fabricated by an optimized solution-processing technique. The framework exhibits the superior stability because of the abundant hydrogen bonds and strong π-π interactions. Thanks to the flexible HOF structure, the membrane possesses the unprecedented pressure-responsive H2 /N2 separation performance. Furthermore, the scratched membrane can be healed by the treatment of solvent vapor, achieving the recovery of separation performance.

An ultrafast responsive NO2 gas sensor based on a hydrogen-bonded organic framework material.

We report the development of a new type of organic semiconductor gas sensor based on a porphyrin-based hydrogen-bonded organic framework (HOF). Owing to the orderly porous structures, the decoration with rich amino sites and the n-type semiconductor nature, this HOF-based sensor exhibits selective NO2 sensing performance with ultra-fast response/recovery rates (17.6 s/15.4 s over 100 ppb) and a limit of detection lower than 40 ppb, together with high sensitivity, good reproducibility, and long-term stability at room temperature. This study demonstrates that HOF-based materials have potential application prospects in gas sensing, thereby offering a new way of thinking for the design and development of sensors.